Electro Best Selling:
HIOKI IR4056-20 Insulation Tester
$167.75Mitutoyo 536-134 Vernier Caliper Blade Type, Range 0-150mm, Graduation 0.05mm
$219.58Mitutoyo 156-105-10 Micrometer Stand for Micrometer 0-50mm / 0-2″
$46.04Mitutoyo 156-101-10 Adjustable Angle Type Micrometer Stand for 0-100mm (0-4″)
$54.14Mitutoyo 350-252-30 (0.001mm) Digital Micrometer Head with 10mm Clamp Nut Stem 0-25mm
$204.54Mitutoyo 350-251-30 (0.001mm) Digital Micrometer Head with 10mm Plain Stem 0-25mm
$196.44Insize1112-300 Digital caliper 0 to 300 mm, 0.01mm with Protective box and Battery
$56.46Insize1112-200 Digital caliper 0 to 200 mm, 0.01mm with Protective box and Battery
$29.96Mitutoyo 530-335 (0.05mm) Vernier Caliper OD/ID Carbide Jaws 0-150mm
$106.90INSIZE 1108-150 Digital Caliper 0 to 150 mm, 0.01mm with Inspection Certificate and Protective case with Battery
$21.87
Already Sold: 0
Available: 10
Mitutoyo 129-114 Interchangeable Rod Depth Micrometer 101mm Base 0-75mm
$78.44Mitutoyo 129-112 Interchangeable Rod Depth Micrometer 63mm Base 0-150mm
$107.36Mitutoyo 129-111 Interchangeable Rod Depth Micrometer 101mm 0-100mm
$86.65
Already Sold: 0
Available: 4
Mitutoyo 104-161A (0.01mm) Analogue Micrometer Interchangeable Anvil 50-150mm
$182.56
Already Sold: 0
Available: 2
Mitutoyo 104-171 (0.01mm) Analogue Micrometer Interchangeable Anvil 0-50mm
$91.28
Already Sold: 0
Available: 4
Mitutoyo 104-138 (0.001″) Outside Micrometer Interchangeable Anvil 6-12″
$265.51Save Big On Warehouse Cleaning
Go to Daily Deals SectionsMicrometer, Test, Measure & Inspect
Mitutoyo 103-130 (0.001mm) Ratchet Stop Economy Design Micrometer 25-50mm
-34%
Micrometer, Test, Measure & Inspect
Mitutoyo 103-130 (0.001mm) Ratchet Stop Economy Design Micrometer 25-50mm
Micrometer Features:
Range: 25-50mm
Resolution: 0.001mm
Accuracy: ± 0.002mm
Flatness: 0.0006mm
Parallelism: (2+R/100) μm – R = max range
Measuring Force: 5-10N
Measuring face: Carbide-tipped, micro-lap finish
Measuring Spindle: With spindle lock, 6.35mm diameter
Spindle pitch: 0.5mm
Scale: Thimble and sleeve satin chrome finish, ø18mm
Ratchet stop
Analogue
Metric
MPN: 103-130
Brand: Mitutoyo
SKU: Mitutoyo 103-130
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-119 (0.02mm) High Accuracy Vernier Caliper 0-300mm (0-12″)
-21%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-119 (0.02mm) High Accuracy Vernier Caliper 0-300mm (0-12″)
Vernier Caliper Features:
Range: 0-300mm (0-12″)
Resolution: 0.02mm
Accuracy: ± 0.04mm
Jaw length: 64mm
Depth Bar: Flat
High accuracy model
Inch/metric
MPN: 530-119
Brand: Mitutoyo
SKU: n/a
Micrometer, Test, Measure & Inspect
Mitutoyo 103-177 (0.001″) Ratchet Stop Economy Design Micrometer 0-1″
-40%
Micrometer, Test, Measure & Inspect
Mitutoyo 103-177 (0.001″) Ratchet Stop Economy Design Micrometer 0-1″
Micrometer Features:
Range: 0-1″
Resolution: 0.001″
Accuracy: ± 0.0001″
Parallelism: [0.00008+0.00004(L/4)]”, L = max. range (inch)
Flatness: 0.000024″
Measuring Force: 5-10N
Measuring face: Carbide-tipped, micro-lap finish
Measuring Spindle: With spindle lock, 6.35mm diameter
Spindle pitch: 0.5mm
Scale: Thimble and sleeve satin chrome finish, ø18mm
Ratchet stop
Analogue
Inch
MPN: 103-177
Brand: Mitutoyo
SKU: Mitutoyo 103-177
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-118 (0.02mm) Vernier Caliper 0-200mm (0-8″)
-35%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-118 (0.02mm) Vernier Caliper 0-200mm (0-8″)
Caliper Features:
Range: 0-200mm (0-8″)
Resolution: 0.02mm (0.001″)
Accuracy: ± 0.03mm (0.001″)
Jaw length: 50mm
Depth bar: flat
Inch/Metric (dual scale)
MPN: 530-118
Brand: Mitutoyo
SKU: Mitutoyo 530-118
Test, Measure & Inspect
Mitutoyo – Universal Protractor 150/300mm Blade – 187-901
A Mitutoyo precision protractor for making accurate angle measurements. The angle between the stock and blade can be set and read to 5‰Ûª resolution with the aid of the built-in magnifier. Can be attached to a height gauge for surface plate work.
Features
| Inch-Metric: | Metric |
| Graduation: | 5 ‘ (0° – 90° – 0°) |
| Blade edge angle: | 60°, 45°, 30° edges |
| Blade length: | 150, 300 mm |
| Delivered: | In a box with acute angle attachment, holder for height gauge, magnifier |
| Mass: | 390 g |
SKU: Mitutoyo 187-901
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-312 (0.02mm) Vernier Caliper 0-150mm (0-6″)
-43%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-312 (0.02mm) Vernier Caliper 0-150mm (0-6″)
Caliper Features:
Range: 0-150mm (0-6″)
Resolution: 0.02mm (0.001″)
Accuracy: ± 0.03mm (0.001″)
Jaw length: 40mm
Depth bar: flat
Inch/Metric (dual scale)
MPN: 530-312
Brand: Mitutoyo
SKU: Mitutoyo 530-312
Micrometer, Test, Measure & Inspect
Mitutoyo 293-230-30 Digimatic Micrometer Metric IP65 SPC Data Output Ratchet Stop 0-25mm
-8%
Micrometer, Test, Measure & Inspect
Mitutoyo 293-230-30 Digimatic Micrometer Metric IP65 SPC Data Output Ratchet Stop 0-25mm
Micrometer Features:
Resolution: 0.001mm
Accuracy: ± 0.001mm
Flatness: 0.0003mm
Parallelism: 0.001mm
IP65 Protected: Waterproof (coolant & dust resistant)
Carbide measuring faces, micro lap finish
Ratchet Stop
With SPC data output
Thimble and Sleeve scale
Metric only
Measuring Spindle: 6.35mm diameter, spindle pitch 0.5mm
MPN: 293-230-30
Brand: Mitutoyo
SKU: Mitutoyo 293-230-30
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 532-121 (0.02mm) Vernier Caliper Fine Adjustment 0-280mm (0-11″)
-15%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 532-121 (0.02mm) Vernier Caliper Fine Adjustment 0-280mm (0-11″)
Vernier Caliper Features:
Range: 0-280mm (0-11″)
Resolution: 0.02mm (0.001″)
Accuracy: ± 0.4mm
Jaw length: 64mm
Depth Bar: Flat
Fine adjustment
Inch/metric
MPN: 532-121
Brand: Mitutoyo
SKU: Mitutoyo 532-121
Dial Indicator, Test, Measure & Inspect
Mitutoyo 2046A (0.01mm) Lug Back Shockproof Dial Indicator 0-10mm
-51%
Dial Indicator, Test, Measure & Inspect
Mitutoyo 2046A (0.01mm) Lug Back Shockproof Dial Indicator 0-10mm
Indicator Features:
Range: 0-10mm
Resolution: 0.01mm
Accuracy: ± 0.013mm
Accuracy 1/10 rev: 0.005mm
Accuracy 1 rev: 0.010mm
Repeatability: 0.003mm
Measuring Force: 1.4N or less
Carbide tipped, thread: M 2.5 x 0.45 mm
MPN: 2046A-09
Brand: Mitutoyo
SKU: Mitutoyo 2046
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 500-196-30, Digital Caliper, Absolute Digimatic, Advance Onsite Sensor, 0-6″/0-150mm, 0.01 mm Resolution
-23%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 500-196-30, Digital Caliper, Absolute Digimatic, Advance Onsite Sensor, 0-6″/0-150mm, 0.01 mm Resolution
Mitutoyo 500-196-30 Features:
Model No: Mitutoyo 500-196-30
Range: 0-150mm (6″)
Resolution: 0.01mm (0.0005″)
Accuracy: ± 0.02mm (0.001″)
Repeatability: 0.01mm (0.0005″)
Jaw length: 40mm
Depth Bar: Square
Thumb Roller
No Data Output – NO
Origin (ABS-Zero): Yes
Inch/Metric
SKU: Mitutoyo 500-196-30
Dial Indicator
Mitutoyo 543-720B (0.0005mm) Flat Back Digital Indicator ID-C 0-25mm
Detailed Description
This Mitutoyo multifunction standard indicator is reliable and easy to use and includes the following features:
Bidirectional communication e.g. to perform parameter setting from a PC (Digimatic S 1 interface) is possible.
The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.
Excellent visibility with a large digital/analog display.
Measurements such as simple calculation and peak detection are possible.
Equipped with a calibration schedule warning function.
GO/±NG judgement is performed by setting the upper and lower tolerances.
A function lock protects the display against unauthorised use.
SKU: n/a
Micrometer
Mitutoyo 293-340-30 Digimatic Micrometer IP65 0-25mm (0-1″)
Detailed Description
This IP65 Micrometer offers outstanding accuracy without data output, is highly robust and offers the following benefits:
Oil-resistant material used for all plastic parts
Extraordinary battery life of approx. 2.4 years
IP65: Excellent resistance against water and dust enables this micrometer to be used in machining situations that include splashing coolant fluid
NO SPC data output – NO Output
Manufacture Part Number: 293-340-30
SKU: n/a
Micrometer, Test, Measure & Inspect
Mitutoyo 103-130 (0.001mm) Ratchet Stop Economy Design Micrometer 25-50mm
-34%
Micrometer, Test, Measure & Inspect
Mitutoyo 103-130 (0.001mm) Ratchet Stop Economy Design Micrometer 25-50mm
Micrometer Features:
Range: 25-50mm
Resolution: 0.001mm
Accuracy: ± 0.002mm
Flatness: 0.0006mm
Parallelism: (2+R/100) μm – R = max range
Measuring Force: 5-10N
Measuring face: Carbide-tipped, micro-lap finish
Measuring Spindle: With spindle lock, 6.35mm diameter
Spindle pitch: 0.5mm
Scale: Thimble and sleeve satin chrome finish, ø18mm
Ratchet stop
Analogue
Metric
MPN: 103-130
Brand: Mitutoyo
SKU: Mitutoyo 103-130
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-119 (0.02mm) High Accuracy Vernier Caliper 0-300mm (0-12″)
-21%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-119 (0.02mm) High Accuracy Vernier Caliper 0-300mm (0-12″)
Vernier Caliper Features:
Range: 0-300mm (0-12″)
Resolution: 0.02mm
Accuracy: ± 0.04mm
Jaw length: 64mm
Depth Bar: Flat
High accuracy model
Inch/metric
MPN: 530-119
Brand: Mitutoyo
SKU: n/a
Micrometer, Test, Measure & Inspect
Mitutoyo 103-177 (0.001″) Ratchet Stop Economy Design Micrometer 0-1″
-40%
Micrometer, Test, Measure & Inspect
Mitutoyo 103-177 (0.001″) Ratchet Stop Economy Design Micrometer 0-1″
Micrometer Features:
Range: 0-1″
Resolution: 0.001″
Accuracy: ± 0.0001″
Parallelism: [0.00008+0.00004(L/4)]”, L = max. range (inch)
Flatness: 0.000024″
Measuring Force: 5-10N
Measuring face: Carbide-tipped, micro-lap finish
Measuring Spindle: With spindle lock, 6.35mm diameter
Spindle pitch: 0.5mm
Scale: Thimble and sleeve satin chrome finish, ø18mm
Ratchet stop
Analogue
Inch
MPN: 103-177
Brand: Mitutoyo
SKU: Mitutoyo 103-177
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-118 (0.02mm) Vernier Caliper 0-200mm (0-8″)
-35%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-118 (0.02mm) Vernier Caliper 0-200mm (0-8″)
Caliper Features:
Range: 0-200mm (0-8″)
Resolution: 0.02mm (0.001″)
Accuracy: ± 0.03mm (0.001″)
Jaw length: 50mm
Depth bar: flat
Inch/Metric (dual scale)
MPN: 530-118
Brand: Mitutoyo
SKU: Mitutoyo 530-118
Test, Measure & Inspect
Mitutoyo – Universal Protractor 150/300mm Blade – 187-901
A Mitutoyo precision protractor for making accurate angle measurements. The angle between the stock and blade can be set and read to 5‰Ûª resolution with the aid of the built-in magnifier. Can be attached to a height gauge for surface plate work.
Features
| Inch-Metric: | Metric |
| Graduation: | 5 ‘ (0° – 90° – 0°) |
| Blade edge angle: | 60°, 45°, 30° edges |
| Blade length: | 150, 300 mm |
| Delivered: | In a box with acute angle attachment, holder for height gauge, magnifier |
| Mass: | 390 g |
SKU: Mitutoyo 187-901
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-312 (0.02mm) Vernier Caliper 0-150mm (0-6″)
-43%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-312 (0.02mm) Vernier Caliper 0-150mm (0-6″)
Caliper Features:
Range: 0-150mm (0-6″)
Resolution: 0.02mm (0.001″)
Accuracy: ± 0.03mm (0.001″)
Jaw length: 40mm
Depth bar: flat
Inch/Metric (dual scale)
MPN: 530-312
Brand: Mitutoyo
SKU: Mitutoyo 530-312
Micrometer, Test, Measure & Inspect
Mitutoyo 293-230-30 Digimatic Micrometer Metric IP65 SPC Data Output Ratchet Stop 0-25mm
-8%
Micrometer, Test, Measure & Inspect
Mitutoyo 293-230-30 Digimatic Micrometer Metric IP65 SPC Data Output Ratchet Stop 0-25mm
Micrometer Features:
Resolution: 0.001mm
Accuracy: ± 0.001mm
Flatness: 0.0003mm
Parallelism: 0.001mm
IP65 Protected: Waterproof (coolant & dust resistant)
Carbide measuring faces, micro lap finish
Ratchet Stop
With SPC data output
Thimble and Sleeve scale
Metric only
Measuring Spindle: 6.35mm diameter, spindle pitch 0.5mm
MPN: 293-230-30
Brand: Mitutoyo
SKU: Mitutoyo 293-230-30
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 532-121 (0.02mm) Vernier Caliper Fine Adjustment 0-280mm (0-11″)
-15%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 532-121 (0.02mm) Vernier Caliper Fine Adjustment 0-280mm (0-11″)
Vernier Caliper Features:
Range: 0-280mm (0-11″)
Resolution: 0.02mm (0.001″)
Accuracy: ± 0.4mm
Jaw length: 64mm
Depth Bar: Flat
Fine adjustment
Inch/metric
MPN: 532-121
Brand: Mitutoyo
SKU: Mitutoyo 532-121
Dial Indicator, Test, Measure & Inspect
Mitutoyo 2046A (0.01mm) Lug Back Shockproof Dial Indicator 0-10mm
-51%
Dial Indicator, Test, Measure & Inspect
Mitutoyo 2046A (0.01mm) Lug Back Shockproof Dial Indicator 0-10mm
Indicator Features:
Range: 0-10mm
Resolution: 0.01mm
Accuracy: ± 0.013mm
Accuracy 1/10 rev: 0.005mm
Accuracy 1 rev: 0.010mm
Repeatability: 0.003mm
Measuring Force: 1.4N or less
Carbide tipped, thread: M 2.5 x 0.45 mm
MPN: 2046A-09
Brand: Mitutoyo
SKU: Mitutoyo 2046
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 500-196-30, Digital Caliper, Absolute Digimatic, Advance Onsite Sensor, 0-6″/0-150mm, 0.01 mm Resolution
-23%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 500-196-30, Digital Caliper, Absolute Digimatic, Advance Onsite Sensor, 0-6″/0-150mm, 0.01 mm Resolution
Mitutoyo 500-196-30 Features:
Model No: Mitutoyo 500-196-30
Range: 0-150mm (6″)
Resolution: 0.01mm (0.0005″)
Accuracy: ± 0.02mm (0.001″)
Repeatability: 0.01mm (0.0005″)
Jaw length: 40mm
Depth Bar: Square
Thumb Roller
No Data Output – NO
Origin (ABS-Zero): Yes
Inch/Metric
SKU: Mitutoyo 500-196-30
Dial Indicator
Mitutoyo 543-720B (0.0005mm) Flat Back Digital Indicator ID-C 0-25mm
Detailed Description
This Mitutoyo multifunction standard indicator is reliable and easy to use and includes the following features:
Bidirectional communication e.g. to perform parameter setting from a PC (Digimatic S 1 interface) is possible.
The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.
Excellent visibility with a large digital/analog display.
Measurements such as simple calculation and peak detection are possible.
Equipped with a calibration schedule warning function.
GO/±NG judgement is performed by setting the upper and lower tolerances.
A function lock protects the display against unauthorised use.
SKU: n/a
Micrometer
Mitutoyo 293-340-30 Digimatic Micrometer IP65 0-25mm (0-1″)
Detailed Description
This IP65 Micrometer offers outstanding accuracy without data output, is highly robust and offers the following benefits:
Oil-resistant material used for all plastic parts
Extraordinary battery life of approx. 2.4 years
IP65: Excellent resistance against water and dust enables this micrometer to be used in machining situations that include splashing coolant fluid
NO SPC data output – NO Output
Manufacture Part Number: 293-340-30
SKU: n/a
Micrometer, Test, Measure & Inspect
Mitutoyo 293-831-30 Digital Micrometer 0-25mm (0-1″)
Detailed Description
This Standard Digimatic Micrometer is an affordable device that offers the following benefits:
It is cost-effective with simplified functionality for standard applications.
Increased operability thanks to easy-to-read LCD with 30% more character display area than previous model
Extraordinary battery life of approx. 2.4 years.
Equipped with Friction Thimble for constant measuring force.
No Data Output- No Output
Other Details
215g lightweight construction
Tungsten carbide tipped measuring faces
Accuracy ± 2μm
Imperial or metric reading
Large LCD display
Supplied with
Batteries, instruction manual and storage case.
Micrometers – Digital
Digital Electronic LCD Display micrometers, for workshop or maintenance use.
SKU: n/a
Dial Indicator, Test, Measure & Inspect
Mitutoyo 513-517-10T (0.01mm) Horizontal Pocket Type Dial Test Indicator with Bracket 0.8mm
-11%
Dial Indicator, Test, Measure & Inspect
Mitutoyo 513-517-10T (0.01mm) Horizontal Pocket Type Dial Test Indicator with Bracket 0.8mm
Detailed Description
This is a small type of Dial Test Indicator (Lever Type) which offers you the following benefits:
Reversible measuring direction (clutch type)
Jeweled bearings assure higher sensitivity and accuracy
Carbide stylus tip ø2 mm
Accessories Included
8mm & 4mm Stem
Swivel clamp for 4mm & 8mm dovetail stem
Stylus 1mm diameter carbide point
Stylus 3mm diameter carbide point
100mm Holding Bar
8mm diameter holding rod
Spanner
SKU: n/a
Micrometer, Test, Measure & Inspect
Mitutoyo 103-130 (0.001mm) Ratchet Stop Economy Design Micrometer 25-50mm
-34%
Micrometer, Test, Measure & Inspect
Mitutoyo 103-130 (0.001mm) Ratchet Stop Economy Design Micrometer 25-50mm
Micrometer Features:
Range: 25-50mm
Resolution: 0.001mm
Accuracy: ± 0.002mm
Flatness: 0.0006mm
Parallelism: (2+R/100) μm – R = max range
Measuring Force: 5-10N
Measuring face: Carbide-tipped, micro-lap finish
Measuring Spindle: With spindle lock, 6.35mm diameter
Spindle pitch: 0.5mm
Scale: Thimble and sleeve satin chrome finish, ø18mm
Ratchet stop
Analogue
Metric
MPN: 103-130
Brand: Mitutoyo
SKU: Mitutoyo 103-130
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-119 (0.02mm) High Accuracy Vernier Caliper 0-300mm (0-12″)
-21%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-119 (0.02mm) High Accuracy Vernier Caliper 0-300mm (0-12″)
Vernier Caliper Features:
Range: 0-300mm (0-12″)
Resolution: 0.02mm
Accuracy: ± 0.04mm
Jaw length: 64mm
Depth Bar: Flat
High accuracy model
Inch/metric
MPN: 530-119
Brand: Mitutoyo
SKU: n/a
Micrometer, Test, Measure & Inspect
Mitutoyo 103-177 (0.001″) Ratchet Stop Economy Design Micrometer 0-1″
-40%
Micrometer, Test, Measure & Inspect
Mitutoyo 103-177 (0.001″) Ratchet Stop Economy Design Micrometer 0-1″
Micrometer Features:
Range: 0-1″
Resolution: 0.001″
Accuracy: ± 0.0001″
Parallelism: [0.00008+0.00004(L/4)]”, L = max. range (inch)
Flatness: 0.000024″
Measuring Force: 5-10N
Measuring face: Carbide-tipped, micro-lap finish
Measuring Spindle: With spindle lock, 6.35mm diameter
Spindle pitch: 0.5mm
Scale: Thimble and sleeve satin chrome finish, ø18mm
Ratchet stop
Analogue
Inch
MPN: 103-177
Brand: Mitutoyo
SKU: Mitutoyo 103-177
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-118 (0.02mm) Vernier Caliper 0-200mm (0-8″)
-35%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-118 (0.02mm) Vernier Caliper 0-200mm (0-8″)
Caliper Features:
Range: 0-200mm (0-8″)
Resolution: 0.02mm (0.001″)
Accuracy: ± 0.03mm (0.001″)
Jaw length: 50mm
Depth bar: flat
Inch/Metric (dual scale)
MPN: 530-118
Brand: Mitutoyo
SKU: Mitutoyo 530-118
Test, Measure & Inspect
Mitutoyo – Universal Protractor 150/300mm Blade – 187-901
A Mitutoyo precision protractor for making accurate angle measurements. The angle between the stock and blade can be set and read to 5‰Ûª resolution with the aid of the built-in magnifier. Can be attached to a height gauge for surface plate work.
Features
| Inch-Metric: | Metric |
| Graduation: | 5 ‘ (0° – 90° – 0°) |
| Blade edge angle: | 60°, 45°, 30° edges |
| Blade length: | 150, 300 mm |
| Delivered: | In a box with acute angle attachment, holder for height gauge, magnifier |
| Mass: | 390 g |
SKU: Mitutoyo 187-901
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-312 (0.02mm) Vernier Caliper 0-150mm (0-6″)
-43%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-312 (0.02mm) Vernier Caliper 0-150mm (0-6″)
Caliper Features:
Range: 0-150mm (0-6″)
Resolution: 0.02mm (0.001″)
Accuracy: ± 0.03mm (0.001″)
Jaw length: 40mm
Depth bar: flat
Inch/Metric (dual scale)
MPN: 530-312
Brand: Mitutoyo
SKU: Mitutoyo 530-312
Micrometer, Test, Measure & Inspect
Mitutoyo 293-230-30 Digimatic Micrometer Metric IP65 SPC Data Output Ratchet Stop 0-25mm
-8%
Micrometer, Test, Measure & Inspect
Mitutoyo 293-230-30 Digimatic Micrometer Metric IP65 SPC Data Output Ratchet Stop 0-25mm
Micrometer Features:
Resolution: 0.001mm
Accuracy: ± 0.001mm
Flatness: 0.0003mm
Parallelism: 0.001mm
IP65 Protected: Waterproof (coolant & dust resistant)
Carbide measuring faces, micro lap finish
Ratchet Stop
With SPC data output
Thimble and Sleeve scale
Metric only
Measuring Spindle: 6.35mm diameter, spindle pitch 0.5mm
MPN: 293-230-30
Brand: Mitutoyo
SKU: Mitutoyo 293-230-30
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 532-121 (0.02mm) Vernier Caliper Fine Adjustment 0-280mm (0-11″)
-15%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 532-121 (0.02mm) Vernier Caliper Fine Adjustment 0-280mm (0-11″)
Vernier Caliper Features:
Range: 0-280mm (0-11″)
Resolution: 0.02mm (0.001″)
Accuracy: ± 0.4mm
Jaw length: 64mm
Depth Bar: Flat
Fine adjustment
Inch/metric
MPN: 532-121
Brand: Mitutoyo
SKU: Mitutoyo 532-121
Dial Indicator, Test, Measure & Inspect
Mitutoyo 2046A (0.01mm) Lug Back Shockproof Dial Indicator 0-10mm
-51%
Dial Indicator, Test, Measure & Inspect
Mitutoyo 2046A (0.01mm) Lug Back Shockproof Dial Indicator 0-10mm
Indicator Features:
Range: 0-10mm
Resolution: 0.01mm
Accuracy: ± 0.013mm
Accuracy 1/10 rev: 0.005mm
Accuracy 1 rev: 0.010mm
Repeatability: 0.003mm
Measuring Force: 1.4N or less
Carbide tipped, thread: M 2.5 x 0.45 mm
MPN: 2046A-09
Brand: Mitutoyo
SKU: Mitutoyo 2046
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 500-196-30, Digital Caliper, Absolute Digimatic, Advance Onsite Sensor, 0-6″/0-150mm, 0.01 mm Resolution
-23%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 500-196-30, Digital Caliper, Absolute Digimatic, Advance Onsite Sensor, 0-6″/0-150mm, 0.01 mm Resolution
Mitutoyo 500-196-30 Features:
Model No: Mitutoyo 500-196-30
Range: 0-150mm (6″)
Resolution: 0.01mm (0.0005″)
Accuracy: ± 0.02mm (0.001″)
Repeatability: 0.01mm (0.0005″)
Jaw length: 40mm
Depth Bar: Square
Thumb Roller
No Data Output – NO
Origin (ABS-Zero): Yes
Inch/Metric
SKU: Mitutoyo 500-196-30
Dial Indicator
Mitutoyo 543-720B (0.0005mm) Flat Back Digital Indicator ID-C 0-25mm
Detailed Description
This Mitutoyo multifunction standard indicator is reliable and easy to use and includes the following features:
Bidirectional communication e.g. to perform parameter setting from a PC (Digimatic S 1 interface) is possible.
The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.
Excellent visibility with a large digital/analog display.
Measurements such as simple calculation and peak detection are possible.
Equipped with a calibration schedule warning function.
GO/±NG judgement is performed by setting the upper and lower tolerances.
A function lock protects the display against unauthorised use.
SKU: n/a
Micrometer
Mitutoyo 293-340-30 Digimatic Micrometer IP65 0-25mm (0-1″)
Detailed Description
This IP65 Micrometer offers outstanding accuracy without data output, is highly robust and offers the following benefits:
Oil-resistant material used for all plastic parts
Extraordinary battery life of approx. 2.4 years
IP65: Excellent resistance against water and dust enables this micrometer to be used in machining situations that include splashing coolant fluid
NO SPC data output – NO Output
Manufacture Part Number: 293-340-30
SKU: n/a
Micrometer, Test, Measure & Inspect
Mitutoyo 293-831-30 Digital Micrometer 0-25mm (0-1″)
Detailed Description
This Standard Digimatic Micrometer is an affordable device that offers the following benefits:
It is cost-effective with simplified functionality for standard applications.
Increased operability thanks to easy-to-read LCD with 30% more character display area than previous model
Extraordinary battery life of approx. 2.4 years.
Equipped with Friction Thimble for constant measuring force.
No Data Output- No Output
Other Details
215g lightweight construction
Tungsten carbide tipped measuring faces
Accuracy ± 2μm
Imperial or metric reading
Large LCD display
Supplied with
Batteries, instruction manual and storage case.
Micrometers – Digital
Digital Electronic LCD Display micrometers, for workshop or maintenance use.
SKU: n/a
Dial Indicator, Test, Measure & Inspect
Mitutoyo 513-517-10T (0.01mm) Horizontal Pocket Type Dial Test Indicator with Bracket 0.8mm
-11%
Dial Indicator, Test, Measure & Inspect
Mitutoyo 513-517-10T (0.01mm) Horizontal Pocket Type Dial Test Indicator with Bracket 0.8mm
Detailed Description
This is a small type of Dial Test Indicator (Lever Type) which offers you the following benefits:
Reversible measuring direction (clutch type)
Jeweled bearings assure higher sensitivity and accuracy
Carbide stylus tip ø2 mm
Accessories Included
8mm & 4mm Stem
Swivel clamp for 4mm & 8mm dovetail stem
Stylus 1mm diameter carbide point
Stylus 3mm diameter carbide point
100mm Holding Bar
8mm diameter holding rod
Spanner
SKU: n/a
Micrometer, Test, Measure & Inspect
Mitutoyo 103-130 (0.001mm) Ratchet Stop Economy Design Micrometer 25-50mm
-34%
Micrometer, Test, Measure & Inspect
Mitutoyo 103-130 (0.001mm) Ratchet Stop Economy Design Micrometer 25-50mm
Micrometer Features:
Range: 25-50mm
Resolution: 0.001mm
Accuracy: ± 0.002mm
Flatness: 0.0006mm
Parallelism: (2+R/100) μm – R = max range
Measuring Force: 5-10N
Measuring face: Carbide-tipped, micro-lap finish
Measuring Spindle: With spindle lock, 6.35mm diameter
Spindle pitch: 0.5mm
Scale: Thimble and sleeve satin chrome finish, ø18mm
Ratchet stop
Analogue
Metric
MPN: 103-130
Brand: Mitutoyo
SKU: Mitutoyo 103-130
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-119 (0.02mm) High Accuracy Vernier Caliper 0-300mm (0-12″)
-21%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-119 (0.02mm) High Accuracy Vernier Caliper 0-300mm (0-12″)
Vernier Caliper Features:
Range: 0-300mm (0-12″)
Resolution: 0.02mm
Accuracy: ± 0.04mm
Jaw length: 64mm
Depth Bar: Flat
High accuracy model
Inch/metric
MPN: 530-119
Brand: Mitutoyo
SKU: n/a
Micrometer, Test, Measure & Inspect
Mitutoyo 103-177 (0.001″) Ratchet Stop Economy Design Micrometer 0-1″
-40%
Micrometer, Test, Measure & Inspect
Mitutoyo 103-177 (0.001″) Ratchet Stop Economy Design Micrometer 0-1″
Micrometer Features:
Range: 0-1″
Resolution: 0.001″
Accuracy: ± 0.0001″
Parallelism: [0.00008+0.00004(L/4)]”, L = max. range (inch)
Flatness: 0.000024″
Measuring Force: 5-10N
Measuring face: Carbide-tipped, micro-lap finish
Measuring Spindle: With spindle lock, 6.35mm diameter
Spindle pitch: 0.5mm
Scale: Thimble and sleeve satin chrome finish, ø18mm
Ratchet stop
Analogue
Inch
MPN: 103-177
Brand: Mitutoyo
SKU: Mitutoyo 103-177
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-118 (0.02mm) Vernier Caliper 0-200mm (0-8″)
-35%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-118 (0.02mm) Vernier Caliper 0-200mm (0-8″)
Caliper Features:
Range: 0-200mm (0-8″)
Resolution: 0.02mm (0.001″)
Accuracy: ± 0.03mm (0.001″)
Jaw length: 50mm
Depth bar: flat
Inch/Metric (dual scale)
MPN: 530-118
Brand: Mitutoyo
SKU: Mitutoyo 530-118
Test, Measure & Inspect
Mitutoyo – Universal Protractor 150/300mm Blade – 187-901
A Mitutoyo precision protractor for making accurate angle measurements. The angle between the stock and blade can be set and read to 5‰Ûª resolution with the aid of the built-in magnifier. Can be attached to a height gauge for surface plate work.
Features
| Inch-Metric: | Metric |
| Graduation: | 5 ‘ (0° – 90° – 0°) |
| Blade edge angle: | 60°, 45°, 30° edges |
| Blade length: | 150, 300 mm |
| Delivered: | In a box with acute angle attachment, holder for height gauge, magnifier |
| Mass: | 390 g |
SKU: Mitutoyo 187-901
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-312 (0.02mm) Vernier Caliper 0-150mm (0-6″)
-43%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-312 (0.02mm) Vernier Caliper 0-150mm (0-6″)
Caliper Features:
Range: 0-150mm (0-6″)
Resolution: 0.02mm (0.001″)
Accuracy: ± 0.03mm (0.001″)
Jaw length: 40mm
Depth bar: flat
Inch/Metric (dual scale)
MPN: 530-312
Brand: Mitutoyo
SKU: Mitutoyo 530-312
Micrometer, Test, Measure & Inspect
Mitutoyo 293-230-30 Digimatic Micrometer Metric IP65 SPC Data Output Ratchet Stop 0-25mm
-8%
Micrometer, Test, Measure & Inspect
Mitutoyo 293-230-30 Digimatic Micrometer Metric IP65 SPC Data Output Ratchet Stop 0-25mm
Micrometer Features:
Resolution: 0.001mm
Accuracy: ± 0.001mm
Flatness: 0.0003mm
Parallelism: 0.001mm
IP65 Protected: Waterproof (coolant & dust resistant)
Carbide measuring faces, micro lap finish
Ratchet Stop
With SPC data output
Thimble and Sleeve scale
Metric only
Measuring Spindle: 6.35mm diameter, spindle pitch 0.5mm
MPN: 293-230-30
Brand: Mitutoyo
SKU: Mitutoyo 293-230-30
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 532-121 (0.02mm) Vernier Caliper Fine Adjustment 0-280mm (0-11″)
-15%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 532-121 (0.02mm) Vernier Caliper Fine Adjustment 0-280mm (0-11″)
Vernier Caliper Features:
Range: 0-280mm (0-11″)
Resolution: 0.02mm (0.001″)
Accuracy: ± 0.4mm
Jaw length: 64mm
Depth Bar: Flat
Fine adjustment
Inch/metric
MPN: 532-121
Brand: Mitutoyo
SKU: Mitutoyo 532-121
Dial Indicator, Test, Measure & Inspect
Mitutoyo 2046A (0.01mm) Lug Back Shockproof Dial Indicator 0-10mm
-51%
Dial Indicator, Test, Measure & Inspect
Mitutoyo 2046A (0.01mm) Lug Back Shockproof Dial Indicator 0-10mm
Indicator Features:
Range: 0-10mm
Resolution: 0.01mm
Accuracy: ± 0.013mm
Accuracy 1/10 rev: 0.005mm
Accuracy 1 rev: 0.010mm
Repeatability: 0.003mm
Measuring Force: 1.4N or less
Carbide tipped, thread: M 2.5 x 0.45 mm
MPN: 2046A-09
Brand: Mitutoyo
SKU: Mitutoyo 2046
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 500-196-30, Digital Caliper, Absolute Digimatic, Advance Onsite Sensor, 0-6″/0-150mm, 0.01 mm Resolution
-23%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 500-196-30, Digital Caliper, Absolute Digimatic, Advance Onsite Sensor, 0-6″/0-150mm, 0.01 mm Resolution
Mitutoyo 500-196-30 Features:
Model No: Mitutoyo 500-196-30
Range: 0-150mm (6″)
Resolution: 0.01mm (0.0005″)
Accuracy: ± 0.02mm (0.001″)
Repeatability: 0.01mm (0.0005″)
Jaw length: 40mm
Depth Bar: Square
Thumb Roller
No Data Output – NO
Origin (ABS-Zero): Yes
Inch/Metric
SKU: Mitutoyo 500-196-30
Dial Indicator
Mitutoyo 543-720B (0.0005mm) Flat Back Digital Indicator ID-C 0-25mm
Detailed Description
This Mitutoyo multifunction standard indicator is reliable and easy to use and includes the following features:
Bidirectional communication e.g. to perform parameter setting from a PC (Digimatic S 1 interface) is possible.
The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.
Excellent visibility with a large digital/analog display.
Measurements such as simple calculation and peak detection are possible.
Equipped with a calibration schedule warning function.
GO/±NG judgement is performed by setting the upper and lower tolerances.
A function lock protects the display against unauthorised use.
SKU: n/a
Micrometer
Mitutoyo 293-340-30 Digimatic Micrometer IP65 0-25mm (0-1″)
Detailed Description
This IP65 Micrometer offers outstanding accuracy without data output, is highly robust and offers the following benefits:
Oil-resistant material used for all plastic parts
Extraordinary battery life of approx. 2.4 years
IP65: Excellent resistance against water and dust enables this micrometer to be used in machining situations that include splashing coolant fluid
NO SPC data output – NO Output
Manufacture Part Number: 293-340-30
SKU: n/a
Micrometer, Test, Measure & Inspect
Mitutoyo 293-831-30 Digital Micrometer 0-25mm (0-1″)
Detailed Description
This Standard Digimatic Micrometer is an affordable device that offers the following benefits:
It is cost-effective with simplified functionality for standard applications.
Increased operability thanks to easy-to-read LCD with 30% more character display area than previous model
Extraordinary battery life of approx. 2.4 years.
Equipped with Friction Thimble for constant measuring force.
No Data Output- No Output
Other Details
215g lightweight construction
Tungsten carbide tipped measuring faces
Accuracy ± 2μm
Imperial or metric reading
Large LCD display
Supplied with
Batteries, instruction manual and storage case.
Micrometers – Digital
Digital Electronic LCD Display micrometers, for workshop or maintenance use.
SKU: n/a
Dial Indicator, Test, Measure & Inspect
Mitutoyo 513-517-10T (0.01mm) Horizontal Pocket Type Dial Test Indicator with Bracket 0.8mm
-11%
Dial Indicator, Test, Measure & Inspect
Mitutoyo 513-517-10T (0.01mm) Horizontal Pocket Type Dial Test Indicator with Bracket 0.8mm
Detailed Description
This is a small type of Dial Test Indicator (Lever Type) which offers you the following benefits:
Reversible measuring direction (clutch type)
Jeweled bearings assure higher sensitivity and accuracy
Carbide stylus tip ø2 mm
Accessories Included
8mm & 4mm Stem
Swivel clamp for 4mm & 8mm dovetail stem
Stylus 1mm diameter carbide point
Stylus 3mm diameter carbide point
100mm Holding Bar
8mm diameter holding rod
Spanner
SKU: n/a
Trending products
Go to Trending Products
Insulation Testers, Test, Measure & Inspect
HIOKI IR4056-20 Insulation Tester
Product Key Features:
Model No: Hioki IR 4056-20
Product Type: Insulation Tester
5-range testing voltage of 50 V/100 MΩ to 1000 V/4000 MΩ
Stable & medium-speed digital readings, 0.8 second response time of PASS/ FAIL decisions
Drop proof onto concrete from 1m (3.28 feet)
Bright LED, luminous LCD, test lead with bright LED lamp to illuminate near hand (Also available in the IR4056-21)
Continuity check via 200 mA testing
Built in AC/DC voltage meter, useful for testing solar power generation systems and electric vehicles
200 mA grounding line continuity check function: The Insulation testers can perform EV
Dimensions: 159 mm (6.26 in) W × 177 mm (6.97 in) H× 53 mm (2.09 in) D,
Weight: 600 g approx.
SKU: n/a
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 536-134 Vernier Caliper Blade Type, Range 0-150mm, Graduation 0.05mm
-19%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 536-134 Vernier Caliper Blade Type, Range 0-150mm, Graduation 0.05mm
Caliper Key Features:
Model No: Mitutoyo 536-134
Range: 0-150mm
Resolution: 0.05mm
Accuracy: ± 0.05mm
Depth bar: Flat Blade
Outside Measuring Faces are Carbide Tipped.
Metric
SKU: Mitutoyo 536-134
Micrometer, Test, Measure & Inspect
Mitutoyo 156-101-10 Adjustable Angle Type Micrometer Stand for 0-100mm (0-4″)
-13%
Micrometer, Test, Measure & Inspect
Mitutoyo 156-101-10 Adjustable Angle Type Micrometer Stand for 0-100mm (0-4″)
Micrometer Stand Features:
Model No: Mitutoyo 156-101-10
Angle Adjustable Type
Designed for micrometers up to 100mm
Ranges: Up to 4″/100mm
Application: Bench-top measuring
SKU: Mitutoyo 156-101-10
Micrometer, Test, Measure & Inspect
Mitutoyo 350-252-30 (0.001mm) Digital Micrometer Head with 10mm Clamp Nut Stem 0-25mm
-23%
Micrometer, Test, Measure & Inspect
Mitutoyo 350-252-30 (0.001mm) Digital Micrometer Head with 10mm Clamp Nut Stem 0-25mm
Micrometer Head Features:
Model No: Mitutoyo 350-252-30
Range: 0-25mm
Resolution: 0.001mm
Accuracy: ± 0.002mm
Stem: clamp nut, Ø 10mm
Spindle Pitch: 0.5mm
Measuring spindle: With spindle lock, ø 6.35mm
Carbide tipped measuring face
ABS / INC Zero
Power: 1x SR44 battery
Data output- YES
Metric
SKU: Mitutoyo 350-251-30-1
Micrometer, Test, Measure & Inspect
Mitutoyo 350-251-30 (0.001mm) Digital Micrometer Head with 10mm Plain Stem 0-25mm
-24%
Micrometer, Test, Measure & Inspect
Mitutoyo 350-251-30 (0.001mm) Digital Micrometer Head with 10mm Plain Stem 0-25mm
Micrometer Head Features:
Model No: Mitutoyo 350-251-30
Range: 0-25mm
Resolution: 0.001mm
Accuracy: ± 0.002mm
Stem: Plain, Ø 10mm
Spindle Pitch: 0.5mm
Measuring spindle: With spindle lock, ø 6.35mm
Carbide tipped measuring face
ABS / INC Zero
Power: 1x SR44 battery
Data output- YES
Metric
SKU: Mitutoyo 350-251-30
Test, Measure & Inspect, Vernier Caliper
Insize 1106-501 Nib Style Digital Caliper, Range 0-500mm / 0-20″, Resolution 0.01mm / 0.0005″, with Data Output
-16%
Test, Measure & Inspect, Vernier Caliper
Insize 1106-501 Nib Style Digital Caliper, Range 0-500mm / 0-20″, Resolution 0.01mm / 0.0005″, with Data Output
Product Key Features:
Model No: Insize 1106-501
Measuring Range: 0–500 mm / 0″–20″
Resolution: 0.01mm/0.0005”.
Button function: on/off, zero, mm/inch, ABS, data preset.
Battery CR2032.
Data output-YES
Made of stainless steel.
Optional Accessory: data output cable (code7302-SPC5A).
SKU: Insize 1106-501
Test, Measure & Inspect, Vernier Caliper
Insize1112-300 Digital caliper 0 to 300 mm, 0.01mm with Protective box and Battery
-18%
Test, Measure & Inspect, Vernier Caliper
Insize1112-300 Digital caliper 0 to 300 mm, 0.01mm with Protective box and Battery
Product Key Features:
Model: Insize 1112-300
Range 0 to 300 mm
RESOLUTION 0.01MM / 0.0005″
BUTTONS ZERO, ON/OFF, MM/INCH
BATTERY CR 2032
MEET DIN862
AUTOMATIC POWER ON/OFF
MADE OF STAINLESS STEEL
SKU: Insize 1112-200-1
Test, Measure & Inspect, Vernier Caliper
Insize1112-200 Digital caliper 0 to 200 mm, 0.01mm with Protective box and Battery
-10%
Test, Measure & Inspect, Vernier Caliper
Insize1112-200 Digital caliper 0 to 200 mm, 0.01mm with Protective box and Battery
Product Key Features:
Model: Insize 1112-200
Range 0 to 200 mm
RESOLUTION 0.01MM / 0.0005″
BUTTONS ZERO, ON/OFF, MM/INCH
BATTERY CR 2032
MEET DIN862
AUTOMATIC POWER ON/OFF
MADE OF STAINLESS STEEL
SKU: Insize 1112-200
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-335 (0.05mm) Vernier Caliper OD/ID Carbide Jaws 0-150mm
-19%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-335 (0.05mm) Vernier Caliper OD/ID Carbide Jaws 0-150mm
Caliper Key Features:
Model No: Mitutoyo 530-335
Range: 0-150mm (0-8″)
Resolution: 0.05mm
Accuracy: ± 0.05mm
Carbide-tipped jaws for OD & ID measurement
Jaw length: 40mm
Depth bar: flat
Metric
SKU: n/a
Test, Measure & Inspect, Vernier Caliper
INSIZE 1112-150 Digital Caliper 0 to 150 mm, 0.01mm with Inspection Certificate and Protective case with Battery
-29%
Test, Measure & Inspect, Vernier Caliper
INSIZE 1112-150 Digital Caliper 0 to 150 mm, 0.01mm with Inspection Certificate and Protective case with Battery
Product Key Features:
Model No: Insize 1112-150
Measurement Range : 0 – 150 mm
Resolution: 0.01mm/0.0005″
Accuracy: +/- 0.03 mm
High Precision
Buttons: on/off, zero, mm/inch, Automatic power off, move the digital unit to turn on power.
Data output- NO
Meet DIN862
Made of stainless steel
SKU: Insize 1112-150
Test, Measure & Inspect, Vernier Caliper
INSIZE 1108-150 Digital Caliper 0 to 150 mm, 0.01mm with Inspection Certificate and Protective case with Battery
-20%
Test, Measure & Inspect, Vernier Caliper
INSIZE 1108-150 Digital Caliper 0 to 150 mm, 0.01mm with Inspection Certificate and Protective case with Battery
Product Key Features:
Model No: Insize 1108-150
Measurement Range : 0 – 150 mm
Resolution: 0.01mm/0.0005″
Accuracy: +/- 0.02 mm
With Thumb Roller
High Precision
Buttons: on/off, zero, mm/inch, Automatic power off, move the digital unit to turn on power.
Data output- YES
Meet DIN862
Made of stainless steel
SKU: Insize 1108-150
Micrometer, Test, Measure & Inspect
Mitutoyo 129-112 Interchangeable Rod Depth Micrometer 63mm Base 0-150mm
-20%
Micrometer, Test, Measure & Inspect
Mitutoyo 129-112 Interchangeable Rod Depth Micrometer 63mm Base 0-150mm
Depth Gauge Features:
Model No: Mitutoyo 129-112
Range: 0-150mm
Resolution: 0.01mm
Accuracy – Micrometer head: ± 0.003mm
Accuracy – Interchangeable head: ± (2+R/75) µm
Repeatability: 0.01mm
Base: 63.5mm x 16mm
No. of rods: 6
Measuring span: 25mm
Spindle pitch: 0.5mm with spindle lock
Zero point errors of rods: 0.004mm
Flatness of measuring rod face: 0.0003mm
Flatness of base: 0.002mm
Parallelism between measuring face (rod) and reference surface (base): 4+L/50) µm
L = max. measuring length (mm)
L = max. measuring length (mm)
Scale: Thimble and sleeve satin chrome finish, ø18 mm
Metric
SKU: n/a
Micrometer, Test, Measure & Inspect
Mitutoyo 129-111 Interchangeable Rod Depth Micrometer 101mm 0-100mm
-20%
Micrometer, Test, Measure & Inspect
Mitutoyo 129-111 Interchangeable Rod Depth Micrometer 101mm 0-100mm
Product Key Features:
Model No: Mitutoyo 129-111
Range: 0-100mm
Resolution: 0.01mm
Accuracy – Micrometer head: ± 0.003mm
Accuracy – Interchangeable head: ± (2+R/75) µm
Repeatability: 0.01mm
Base: 63.5mm x 16mm
No. of rods: 4
Measuring span: 25mm
Spindle pitch: 0.5mm with spindle lock
Zero point errors of rods: 0.004mm
Flatness of measuring rod face: 0.0003mm
Flatness of base: 0.002mm
Parallelism between measuring face (rod) and reference surface (base): 4+L/50) µm
L = max. measuring length (mm)
L = max. measuring length (mm)
Scale: Thimble and sleeve satin chrome finish, ø18 mm
Metric
SKU: Mitutoyo 129-111
Micrometer, Test, Measure & Inspect
Mitutoyo 104-161A (0.01mm) Analogue Micrometer Interchangeable Anvil 50-150mm
-18%
Micrometer, Test, Measure & Inspect
Mitutoyo 104-161A (0.01mm) Analogue Micrometer Interchangeable Anvil 50-150mm
Micrometer Features:
Model No: Mitutoyo 104-161A
Range: 50-150mm
Resolution: 0.01mm
Parallelism: 0.003mm
Flatness: 0.0006mm
Measuring force: 5-10N
Measuring face: Carbide tipped, micro-lap finish spindle and hardened steel anvil
Measuring spindle: With spindle lock, ø6.35 mm , spindle pitch 0.5mm
Spindle feed error: 0.003mm
Interchangeable anvils: 4
Setting standard: 5 (25, 50, 75, 100, 125mm)
Scale: Thimble and sleeve satin chrome finish, ø18 mm
Ratchet stop
Analogue
Metric
SKU: Mitutoyo 104-161A
Micrometer, Test, Measure & Inspect
Mitutoyo 104-171 (0.01mm) Analogue Micrometer Interchangeable Anvil 0-50mm
-18%
Micrometer, Test, Measure & Inspect
Mitutoyo 104-171 (0.01mm) Analogue Micrometer Interchangeable Anvil 0-50mm
Micrometer Features:
Model No: Mitutoyo 104-171
Range: 0-50mm
Resolution: 0.01mm
Parallelism: 0.002mm
Flatness: 0.0006mm
Measuring force: 5-10N
Measuring face: Carbide tipped, micro-lap finish spindle and hardened steel anvil
Measuring spindle: With spindle lock, ø6.35 mm , spindle pitch 0.635mm
Spindle feed error: 0.003mm
Interchangeable anvils: 1
Setting standard: 1 (25mm)
Scale: Thimble and sleeve satin chrome finish, ø18 mm
Analogue
Metric
SKU: Mitutoyo 104-171
Micrometer, Test, Measure & Inspect
Mitutoyo 104-138 (0.001″) Outside Micrometer Interchangeable Anvil 6-12″
-23%
Micrometer, Test, Measure & Inspect
Mitutoyo 104-138 (0.001″) Outside Micrometer Interchangeable Anvil 6-12″
Micrometer Features:
Model No: Mitutoyo 104-138
Range: 6-12″
Resolution: 0.001″
Measuring force: 5-10N
Measuring face: Carbide tipped, micro-lap finish spindle and hardened steel anvil
Measuring spindle: With spindle lock, ø6.35 mm , spindle pitch 0.5mm
Spindle feed error: 0.00015″
Interchangeable anvils: 6
Setting standard: 6 (6, 7, 8, 9, 10, 11″)
Scale: Thimble and sleeve satin chrome finish, ø18 mm
Ratchet stop
Analogue
Inch
SKU: Mitutoyo 104-138
Micrometer, Test, Measure & Inspect
Mitutoyo 103-178 (0.001″) Ratchet Stop Micrometer 1-2″
Micrometer Features:
Model No: Mitutoyo 103-178
Range: 1-2″
Resolution: 0.001″
Accuracy: ± 0.0001″
Parallelism: [0.00008+0.00004(L/4)]”, L = max. range (inch)
Flatness: 0.000024″
Measuring Force: 5-10N
Measuring face: Carbide-tipped, micro-lap finish
Measuring Spindle: With spindle lock, 6.35mm diameter
Spindle pitch: 0.5mm
Scale: Thimble and sleeve satin chrome finish, ø18mm
Ratchet stop
Analogue
Inch
SKU: Mitutoyo 103-178
Micrometer, Test, Measure & Inspect
Mitutoyo 103-136 (0.0001″) Micrometer Friction Thimble 1-2″
Micrometer Features:
Model No: Mitutoyo 103-136
Range: 1-2″
Resolution: 0.0001″
Accuracy: ±0,0001″
Parallelism: 0.00008″
Measuring Force: 5-10N
Measuring face: Carbide-tipped, micro-lap finish
Measuring Spindle: With spindle lock, ø6,35 mm (≤300 mm) ø 8 mm (>300 mm)
Spindle pitch: 0.5mm
Scale: Thimble and sleeve satin chrome finish, ø18mm
Ratchet stop
Analogue
Imperial
SKU: Mitutoyo 103-136
Popular Products
Insulation Testers, Test, Measure & Inspect
HIOKI IR4056-20 Insulation Tester
Product Key Features:
Model No: Hioki IR 4056-20
Product Type: Insulation Tester
5-range testing voltage of 50 V/100 MΩ to 1000 V/4000 MΩ
Stable & medium-speed digital readings, 0.8 second response time of PASS/ FAIL decisions
Drop proof onto concrete from 1m (3.28 feet)
Bright LED, luminous LCD, test lead with bright LED lamp to illuminate near hand (Also available in the IR4056-21)
Continuity check via 200 mA testing
Built in AC/DC voltage meter, useful for testing solar power generation systems and electric vehicles
200 mA grounding line continuity check function: The Insulation testers can perform EV
Dimensions: 159 mm (6.26 in) W × 177 mm (6.97 in) H× 53 mm (2.09 in) D,
Weight: 600 g approx.
SKU: n/a
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 536-134 Vernier Caliper Blade Type, Range 0-150mm, Graduation 0.05mm
-19%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 536-134 Vernier Caliper Blade Type, Range 0-150mm, Graduation 0.05mm
Caliper Key Features:
Model No: Mitutoyo 536-134
Range: 0-150mm
Resolution: 0.05mm
Accuracy: ± 0.05mm
Depth bar: Flat Blade
Outside Measuring Faces are Carbide Tipped.
Metric
SKU: Mitutoyo 536-134
Micrometer, Test, Measure & Inspect
Mitutoyo 156-101-10 Adjustable Angle Type Micrometer Stand for 0-100mm (0-4″)
-13%
Micrometer, Test, Measure & Inspect
Mitutoyo 156-101-10 Adjustable Angle Type Micrometer Stand for 0-100mm (0-4″)
Micrometer Stand Features:
Model No: Mitutoyo 156-101-10
Angle Adjustable Type
Designed for micrometers up to 100mm
Ranges: Up to 4″/100mm
Application: Bench-top measuring
SKU: Mitutoyo 156-101-10
Micrometer, Test, Measure & Inspect
Mitutoyo 350-252-30 (0.001mm) Digital Micrometer Head with 10mm Clamp Nut Stem 0-25mm
-23%
Micrometer, Test, Measure & Inspect
Mitutoyo 350-252-30 (0.001mm) Digital Micrometer Head with 10mm Clamp Nut Stem 0-25mm
Micrometer Head Features:
Model No: Mitutoyo 350-252-30
Range: 0-25mm
Resolution: 0.001mm
Accuracy: ± 0.002mm
Stem: clamp nut, Ø 10mm
Spindle Pitch: 0.5mm
Measuring spindle: With spindle lock, ø 6.35mm
Carbide tipped measuring face
ABS / INC Zero
Power: 1x SR44 battery
Data output- YES
Metric
SKU: Mitutoyo 350-251-30-1
Micrometer, Test, Measure & Inspect
Mitutoyo 350-251-30 (0.001mm) Digital Micrometer Head with 10mm Plain Stem 0-25mm
-24%
Micrometer, Test, Measure & Inspect
Mitutoyo 350-251-30 (0.001mm) Digital Micrometer Head with 10mm Plain Stem 0-25mm
Micrometer Head Features:
Model No: Mitutoyo 350-251-30
Range: 0-25mm
Resolution: 0.001mm
Accuracy: ± 0.002mm
Stem: Plain, Ø 10mm
Spindle Pitch: 0.5mm
Measuring spindle: With spindle lock, ø 6.35mm
Carbide tipped measuring face
ABS / INC Zero
Power: 1x SR44 battery
Data output- YES
Metric
SKU: Mitutoyo 350-251-30
Test, Measure & Inspect, Vernier Caliper
Insize 1106-501 Nib Style Digital Caliper, Range 0-500mm / 0-20″, Resolution 0.01mm / 0.0005″, with Data Output
-16%
Test, Measure & Inspect, Vernier Caliper
Insize 1106-501 Nib Style Digital Caliper, Range 0-500mm / 0-20″, Resolution 0.01mm / 0.0005″, with Data Output
Product Key Features:
Model No: Insize 1106-501
Measuring Range: 0–500 mm / 0″–20″
Resolution: 0.01mm/0.0005”.
Button function: on/off, zero, mm/inch, ABS, data preset.
Battery CR2032.
Data output-YES
Made of stainless steel.
Optional Accessory: data output cable (code7302-SPC5A).
SKU: Insize 1106-501
Test, Measure & Inspect, Vernier Caliper
Insize1112-300 Digital caliper 0 to 300 mm, 0.01mm with Protective box and Battery
-18%
Test, Measure & Inspect, Vernier Caliper
Insize1112-300 Digital caliper 0 to 300 mm, 0.01mm with Protective box and Battery
Product Key Features:
Model: Insize 1112-300
Range 0 to 300 mm
RESOLUTION 0.01MM / 0.0005″
BUTTONS ZERO, ON/OFF, MM/INCH
BATTERY CR 2032
MEET DIN862
AUTOMATIC POWER ON/OFF
MADE OF STAINLESS STEEL
SKU: Insize 1112-200-1
Test, Measure & Inspect, Vernier Caliper
Insize1112-200 Digital caliper 0 to 200 mm, 0.01mm with Protective box and Battery
-10%
Test, Measure & Inspect, Vernier Caliper
Insize1112-200 Digital caliper 0 to 200 mm, 0.01mm with Protective box and Battery
Product Key Features:
Model: Insize 1112-200
Range 0 to 200 mm
RESOLUTION 0.01MM / 0.0005″
BUTTONS ZERO, ON/OFF, MM/INCH
BATTERY CR 2032
MEET DIN862
AUTOMATIC POWER ON/OFF
MADE OF STAINLESS STEEL
SKU: Insize 1112-200
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-335 (0.05mm) Vernier Caliper OD/ID Carbide Jaws 0-150mm
-19%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-335 (0.05mm) Vernier Caliper OD/ID Carbide Jaws 0-150mm
Caliper Key Features:
Model No: Mitutoyo 530-335
Range: 0-150mm (0-8″)
Resolution: 0.05mm
Accuracy: ± 0.05mm
Carbide-tipped jaws for OD & ID measurement
Jaw length: 40mm
Depth bar: flat
Metric
SKU: n/a
Laptops & Computers
Insulation Testers, Test, Measure & Inspect
HIOKI IR4056-20 Insulation Tester
Product Key Features:
Model No: Hioki IR 4056-20
Product Type: Insulation Tester
5-range testing voltage of 50 V/100 MΩ to 1000 V/4000 MΩ
Stable & medium-speed digital readings, 0.8 second response time of PASS/ FAIL decisions
Drop proof onto concrete from 1m (3.28 feet)
Bright LED, luminous LCD, test lead with bright LED lamp to illuminate near hand (Also available in the IR4056-21)
Continuity check via 200 mA testing
Built in AC/DC voltage meter, useful for testing solar power generation systems and electric vehicles
200 mA grounding line continuity check function: The Insulation testers can perform EV
Dimensions: 159 mm (6.26 in) W × 177 mm (6.97 in) H× 53 mm (2.09 in) D,
Weight: 600 g approx.
SKU: n/a
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 536-134 Vernier Caliper Blade Type, Range 0-150mm, Graduation 0.05mm
-19%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 536-134 Vernier Caliper Blade Type, Range 0-150mm, Graduation 0.05mm
Caliper Key Features:
Model No: Mitutoyo 536-134
Range: 0-150mm
Resolution: 0.05mm
Accuracy: ± 0.05mm
Depth bar: Flat Blade
Outside Measuring Faces are Carbide Tipped.
Metric
SKU: Mitutoyo 536-134
Micrometer, Test, Measure & Inspect
Mitutoyo 156-101-10 Adjustable Angle Type Micrometer Stand for 0-100mm (0-4″)
-13%
Micrometer, Test, Measure & Inspect
Mitutoyo 156-101-10 Adjustable Angle Type Micrometer Stand for 0-100mm (0-4″)
Micrometer Stand Features:
Model No: Mitutoyo 156-101-10
Angle Adjustable Type
Designed for micrometers up to 100mm
Ranges: Up to 4″/100mm
Application: Bench-top measuring
SKU: Mitutoyo 156-101-10
Micrometer, Test, Measure & Inspect
Mitutoyo 350-252-30 (0.001mm) Digital Micrometer Head with 10mm Clamp Nut Stem 0-25mm
-23%
Micrometer, Test, Measure & Inspect
Mitutoyo 350-252-30 (0.001mm) Digital Micrometer Head with 10mm Clamp Nut Stem 0-25mm
Micrometer Head Features:
Model No: Mitutoyo 350-252-30
Range: 0-25mm
Resolution: 0.001mm
Accuracy: ± 0.002mm
Stem: clamp nut, Ø 10mm
Spindle Pitch: 0.5mm
Measuring spindle: With spindle lock, ø 6.35mm
Carbide tipped measuring face
ABS / INC Zero
Power: 1x SR44 battery
Data output- YES
Metric
SKU: Mitutoyo 350-251-30-1
Micrometer, Test, Measure & Inspect
Mitutoyo 350-251-30 (0.001mm) Digital Micrometer Head with 10mm Plain Stem 0-25mm
-24%
Micrometer, Test, Measure & Inspect
Mitutoyo 350-251-30 (0.001mm) Digital Micrometer Head with 10mm Plain Stem 0-25mm
Micrometer Head Features:
Model No: Mitutoyo 350-251-30
Range: 0-25mm
Resolution: 0.001mm
Accuracy: ± 0.002mm
Stem: Plain, Ø 10mm
Spindle Pitch: 0.5mm
Measuring spindle: With spindle lock, ø 6.35mm
Carbide tipped measuring face
ABS / INC Zero
Power: 1x SR44 battery
Data output- YES
Metric
SKU: Mitutoyo 350-251-30
Test, Measure & Inspect, Vernier Caliper
Insize 1106-501 Nib Style Digital Caliper, Range 0-500mm / 0-20″, Resolution 0.01mm / 0.0005″, with Data Output
-16%
Test, Measure & Inspect, Vernier Caliper
Insize 1106-501 Nib Style Digital Caliper, Range 0-500mm / 0-20″, Resolution 0.01mm / 0.0005″, with Data Output
Product Key Features:
Model No: Insize 1106-501
Measuring Range: 0–500 mm / 0″–20″
Resolution: 0.01mm/0.0005”.
Button function: on/off, zero, mm/inch, ABS, data preset.
Battery CR2032.
Data output-YES
Made of stainless steel.
Optional Accessory: data output cable (code7302-SPC5A).
SKU: Insize 1106-501
Test, Measure & Inspect, Vernier Caliper
Insize1112-300 Digital caliper 0 to 300 mm, 0.01mm with Protective box and Battery
-18%
Test, Measure & Inspect, Vernier Caliper
Insize1112-300 Digital caliper 0 to 300 mm, 0.01mm with Protective box and Battery
Product Key Features:
Model: Insize 1112-300
Range 0 to 300 mm
RESOLUTION 0.01MM / 0.0005″
BUTTONS ZERO, ON/OFF, MM/INCH
BATTERY CR 2032
MEET DIN862
AUTOMATIC POWER ON/OFF
MADE OF STAINLESS STEEL
SKU: Insize 1112-200-1
Test, Measure & Inspect, Vernier Caliper
Insize1112-200 Digital caliper 0 to 200 mm, 0.01mm with Protective box and Battery
-10%
Test, Measure & Inspect, Vernier Caliper
Insize1112-200 Digital caliper 0 to 200 mm, 0.01mm with Protective box and Battery
Product Key Features:
Model: Insize 1112-200
Range 0 to 200 mm
RESOLUTION 0.01MM / 0.0005″
BUTTONS ZERO, ON/OFF, MM/INCH
BATTERY CR 2032
MEET DIN862
AUTOMATIC POWER ON/OFF
MADE OF STAINLESS STEEL
SKU: Insize 1112-200
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-335 (0.05mm) Vernier Caliper OD/ID Carbide Jaws 0-150mm
-19%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-335 (0.05mm) Vernier Caliper OD/ID Carbide Jaws 0-150mm
Caliper Key Features:
Model No: Mitutoyo 530-335
Range: 0-150mm (0-8″)
Resolution: 0.05mm
Accuracy: ± 0.05mm
Carbide-tipped jaws for OD & ID measurement
Jaw length: 40mm
Depth bar: flat
Metric
SKU: n/a
Test, Measure & Inspect, Vernier Caliper
INSIZE 1112-150 Digital Caliper 0 to 150 mm, 0.01mm with Inspection Certificate and Protective case with Battery
-29%
Test, Measure & Inspect, Vernier Caliper
INSIZE 1112-150 Digital Caliper 0 to 150 mm, 0.01mm with Inspection Certificate and Protective case with Battery
Product Key Features:
Model No: Insize 1112-150
Measurement Range : 0 – 150 mm
Resolution: 0.01mm/0.0005″
Accuracy: +/- 0.03 mm
High Precision
Buttons: on/off, zero, mm/inch, Automatic power off, move the digital unit to turn on power.
Data output- NO
Meet DIN862
Made of stainless steel
SKU: Insize 1112-150
Test, Measure & Inspect, Vernier Caliper
INSIZE 1108-150 Digital Caliper 0 to 150 mm, 0.01mm with Inspection Certificate and Protective case with Battery
-20%
Test, Measure & Inspect, Vernier Caliper
INSIZE 1108-150 Digital Caliper 0 to 150 mm, 0.01mm with Inspection Certificate and Protective case with Battery
Product Key Features:
Model No: Insize 1108-150
Measurement Range : 0 – 150 mm
Resolution: 0.01mm/0.0005″
Accuracy: +/- 0.02 mm
With Thumb Roller
High Precision
Buttons: on/off, zero, mm/inch, Automatic power off, move the digital unit to turn on power.
Data output- YES
Meet DIN862
Made of stainless steel
SKU: Insize 1108-150
Micrometer, Test, Measure & Inspect
Mitutoyo 129-112 Interchangeable Rod Depth Micrometer 63mm Base 0-150mm
-20%
Micrometer, Test, Measure & Inspect
Mitutoyo 129-112 Interchangeable Rod Depth Micrometer 63mm Base 0-150mm
Depth Gauge Features:
Model No: Mitutoyo 129-112
Range: 0-150mm
Resolution: 0.01mm
Accuracy – Micrometer head: ± 0.003mm
Accuracy – Interchangeable head: ± (2+R/75) µm
Repeatability: 0.01mm
Base: 63.5mm x 16mm
No. of rods: 6
Measuring span: 25mm
Spindle pitch: 0.5mm with spindle lock
Zero point errors of rods: 0.004mm
Flatness of measuring rod face: 0.0003mm
Flatness of base: 0.002mm
Parallelism between measuring face (rod) and reference surface (base): 4+L/50) µm
L = max. measuring length (mm)
L = max. measuring length (mm)
Scale: Thimble and sleeve satin chrome finish, ø18 mm
Metric
SKU: n/a
Micrometer, Test, Measure & Inspect
Mitutoyo 129-111 Interchangeable Rod Depth Micrometer 101mm 0-100mm
-20%
Micrometer, Test, Measure & Inspect
Mitutoyo 129-111 Interchangeable Rod Depth Micrometer 101mm 0-100mm
Product Key Features:
Model No: Mitutoyo 129-111
Range: 0-100mm
Resolution: 0.01mm
Accuracy – Micrometer head: ± 0.003mm
Accuracy – Interchangeable head: ± (2+R/75) µm
Repeatability: 0.01mm
Base: 63.5mm x 16mm
No. of rods: 4
Measuring span: 25mm
Spindle pitch: 0.5mm with spindle lock
Zero point errors of rods: 0.004mm
Flatness of measuring rod face: 0.0003mm
Flatness of base: 0.002mm
Parallelism between measuring face (rod) and reference surface (base): 4+L/50) µm
L = max. measuring length (mm)
L = max. measuring length (mm)
Scale: Thimble and sleeve satin chrome finish, ø18 mm
Metric
SKU: Mitutoyo 129-111
Micrometer, Test, Measure & Inspect
Mitutoyo 104-161A (0.01mm) Analogue Micrometer Interchangeable Anvil 50-150mm
-18%
Micrometer, Test, Measure & Inspect
Mitutoyo 104-161A (0.01mm) Analogue Micrometer Interchangeable Anvil 50-150mm
Micrometer Features:
Model No: Mitutoyo 104-161A
Range: 50-150mm
Resolution: 0.01mm
Parallelism: 0.003mm
Flatness: 0.0006mm
Measuring force: 5-10N
Measuring face: Carbide tipped, micro-lap finish spindle and hardened steel anvil
Measuring spindle: With spindle lock, ø6.35 mm , spindle pitch 0.5mm
Spindle feed error: 0.003mm
Interchangeable anvils: 4
Setting standard: 5 (25, 50, 75, 100, 125mm)
Scale: Thimble and sleeve satin chrome finish, ø18 mm
Ratchet stop
Analogue
Metric
SKU: Mitutoyo 104-161A
Micrometer, Test, Measure & Inspect
Mitutoyo 104-171 (0.01mm) Analogue Micrometer Interchangeable Anvil 0-50mm
-18%
Micrometer, Test, Measure & Inspect
Mitutoyo 104-171 (0.01mm) Analogue Micrometer Interchangeable Anvil 0-50mm
Micrometer Features:
Model No: Mitutoyo 104-171
Range: 0-50mm
Resolution: 0.01mm
Parallelism: 0.002mm
Flatness: 0.0006mm
Measuring force: 5-10N
Measuring face: Carbide tipped, micro-lap finish spindle and hardened steel anvil
Measuring spindle: With spindle lock, ø6.35 mm , spindle pitch 0.635mm
Spindle feed error: 0.003mm
Interchangeable anvils: 1
Setting standard: 1 (25mm)
Scale: Thimble and sleeve satin chrome finish, ø18 mm
Analogue
Metric
SKU: Mitutoyo 104-171
Micrometer, Test, Measure & Inspect
Mitutoyo 104-138 (0.001″) Outside Micrometer Interchangeable Anvil 6-12″
-23%
Micrometer, Test, Measure & Inspect
Mitutoyo 104-138 (0.001″) Outside Micrometer Interchangeable Anvil 6-12″
Micrometer Features:
Model No: Mitutoyo 104-138
Range: 6-12″
Resolution: 0.001″
Measuring force: 5-10N
Measuring face: Carbide tipped, micro-lap finish spindle and hardened steel anvil
Measuring spindle: With spindle lock, ø6.35 mm , spindle pitch 0.5mm
Spindle feed error: 0.00015″
Interchangeable anvils: 6
Setting standard: 6 (6, 7, 8, 9, 10, 11″)
Scale: Thimble and sleeve satin chrome finish, ø18 mm
Ratchet stop
Analogue
Inch
SKU: Mitutoyo 104-138
Micrometer, Test, Measure & Inspect
Mitutoyo 103-178 (0.001″) Ratchet Stop Micrometer 1-2″
Micrometer Features:
Model No: Mitutoyo 103-178
Range: 1-2″
Resolution: 0.001″
Accuracy: ± 0.0001″
Parallelism: [0.00008+0.00004(L/4)]”, L = max. range (inch)
Flatness: 0.000024″
Measuring Force: 5-10N
Measuring face: Carbide-tipped, micro-lap finish
Measuring Spindle: With spindle lock, 6.35mm diameter
Spindle pitch: 0.5mm
Scale: Thimble and sleeve satin chrome finish, ø18mm
Ratchet stop
Analogue
Inch
SKU: Mitutoyo 103-178
Micrometer, Test, Measure & Inspect
Mitutoyo 103-136 (0.0001″) Micrometer Friction Thimble 1-2″
Micrometer Features:
Model No: Mitutoyo 103-136
Range: 1-2″
Resolution: 0.0001″
Accuracy: ±0,0001″
Parallelism: 0.00008″
Measuring Force: 5-10N
Measuring face: Carbide-tipped, micro-lap finish
Measuring Spindle: With spindle lock, ø6,35 mm (≤300 mm) ø 8 mm (>300 mm)
Spindle pitch: 0.5mm
Scale: Thimble and sleeve satin chrome finish, ø18mm
Ratchet stop
Analogue
Imperial
SKU: Mitutoyo 103-136
