-20%
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-124 (0.02mm) Vernier Caliper 0-300mm
$94.87 $118.87
Related products
-
Dial Indicator, Test, Measure & Inspect
Mitutoyo 513-517-10T (0.01mm) Horizontal Pocket Type Dial Test Indicator with Bracket 0.8mm
Dial Indicator, Test, Measure & InspectMitutoyo 513-517-10T (0.01mm) Horizontal Pocket Type Dial Test Indicator with Bracket 0.8mm
Detailed Description
This is a small type of Dial Test Indicator (Lever Type) which offers you the following benefits:
- Reversible measuring direction (clutch type)
- Jeweled bearings assure higher sensitivity and accuracy
- Carbide stylus tip ø2 mm
Accessories Included
- 8mm & 4mm Stem
- Swivel clamp for 4mm & 8mm dovetail stem
- Stylus 1mm diameter carbide point
- Stylus 3mm diameter carbide point
- 100mm Holding Bar
- 8mm diameter holding rod
- Spanner
SKU: n/a -
Test, Measure & Inspect
Mitutoyo – Universal Protractor 150/300mm Blade – 187-901
A Mitutoyo precision protractor for making accurate angle measurements. The angle between the stock and blade can be set and read to 5‰Ûª resolution with the aid of the built-in magnifier. Can be attached to a height gauge for surface plate work.
Features
Inch-Metric: Metric Graduation: 5 ‘ (0° – 90° – 0°) Blade edge angle: 60°, 45°, 30° edges Blade length: 150, 300 mm Delivered: In a box with acute angle attachment, holder for height gauge, magnifier Mass: 390 g SKU: Mitutoyo 187-901 -
Dial Indicator, Test, Measure & Inspect
Mitutoyo 543-790-10 (0.001mm) IP42 Lug Back Digital Indicator ID-S 0-12.7mm
Dial Indicator, Test, Measure & InspectMitutoyo 543-790-10 (0.001mm) IP42 Lug Back Digital Indicator ID-S 0-12.7mm
Detailed Description
543-790-10 MITUTOYO Simple Design Absolute Digimatic Indicator: 0-12.7mm
The Mitutoyo 543-790-10 Simple Design Absolute Digimatic Indicator has the following specifications:
- Range: 12.7mm
- Resolution: 0.001mm
- Model: ID-S112X
- Accuracy: 0.003mm
- Measuring force: 1.5N or less
Features:
- As compact as standard Series 2 dial indicators.
- After the initial zero-setting with the ORIGIN button, the repeated absolute positioning is no longer necessary over the entire battery life.
- Employing the ABSOLUTE linear encoder, the ID-S always displays the spindle “Absolute Position” from the origin at power-on. Also unlimited response speed eliminates over-speed errors.
- SPC data output- YES
SKU: n/a -
Micrometer, Test, Measure & Inspect
Mitutoyo 293-230-30 Digimatic Micrometer Metric IP65 SPC Data Output Ratchet Stop 0-25mm
Micrometer, Test, Measure & InspectMitutoyo 293-230-30 Digimatic Micrometer Metric IP65 SPC Data Output Ratchet Stop 0-25mm
Micrometer Features:
- Resolution: 0.001mm
- Accuracy: ± 0.001mm
- Flatness: 0.0003mm
- Parallelism: 0.001mm
- IP65 Protected: Waterproof (coolant & dust resistant)
- Carbide measuring faces, micro lap finish
- Ratchet Stop
- With SPC data output
- Thimble and Sleeve scale
- Metric only
- Measuring Spindle: 6.35mm diameter, spindle pitch 0.5mm
- MPN: 293-230-30
- Brand: Mitutoyo
SKU: Mitutoyo 293-230-30 -
Dial Indicator, Test, Measure & Inspect
Mitutoyo 543-781-10 (0.01mm) Lug Back Digital Indicator ID-S 0-12.7mm
Dial Indicator, Test, Measure & InspectMitutoyo 543-781-10 (0.01mm) Lug Back Digital Indicator ID-S 0-12.7mm
Detailed Description
This Mitutoyo standard model of indicator is reliable and easy to use. The ABSOLUTE Digimatic Indicator ID-S offers you the following benefits:
- The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.
- You can access all functions by using the large, user-friendly buttons on the front of the indicator.
- Large character height of 9 mm provides good readability.
- Exceptional battery life.
- Data Output – YES
- Origin reset is not required even when data is re-displayed after a disappearance due to insufficient illumination during use
SKU: n/a
There are no reviews yet.