Detailed Description:
This Dial Indicator Thickness Gauge enables you to measure tube wall thickness, lm/paper etc.
with at contact points, resp. lens thickness or groove depth
-16%
Dial Indicator, Test, Measure & Inspect
Mitutoyo 7360 A Dial Indicator Thickness Gauge 0-10mm, 0,01mm, Tube Thickness
Basic Features
- Model No: Mitutoyo 7360A
- Range: 0 – 10 mm
- Accuracy: ±0,015 mm
- Graduation: 0.01 mm
- Mass: 200 g
- Parallelism: 5 µm mm
- Max. measuring depth: 20 mm
- Contact point: Thread M 2.5 x 0.45 mm
- Inch-Metric: Metric
$78.66 $94.15
Based on 0 reviews
Be the first to review “Mitutoyo 7360 A Dial Indicator Thickness Gauge 0-10mm, 0,01mm, Tube Thickness”
Related products
-
Micrometer, Test, Measure & Inspect
Mitutoyo 293-230-30 Digimatic Micrometer Metric IP65 SPC Data Output Ratchet Stop 0-25mm
Micrometer, Test, Measure & InspectMitutoyo 293-230-30 Digimatic Micrometer Metric IP65 SPC Data Output Ratchet Stop 0-25mm
Micrometer Features:
- Resolution: 0.001mm
- Accuracy: ± 0.001mm
- Flatness: 0.0003mm
- Parallelism: 0.001mm
- IP65 Protected: Waterproof (coolant & dust resistant)
- Carbide measuring faces, micro lap finish
- Ratchet Stop
- With SPC data output
- Thimble and Sleeve scale
- Metric only
- Measuring Spindle: 6.35mm diameter, spindle pitch 0.5mm
- MPN: 293-230-30
- Brand: Mitutoyo
SKU: Mitutoyo 293-230-30 -
Test, Measure & Inspect, Vernier Caliper
Mitutoyo 530-312 (0.02mm) Vernier Caliper 0-150mm (0-6″)
Caliper Features:
- Range: 0-150mm (0-6″)
- Resolution: 0.02mm (0.001″)
- Accuracy: ± 0.03mm (0.001″)
- Jaw length: 40mm
- Depth bar: flat
- Inch/Metric (dual scale)
- MPN: 530-312
- Brand: Mitutoyo
SKU: Mitutoyo 530-312 -
Dial Indicator, Test, Measure & Inspect
Mitutoyo 513-517-10T (0.01mm) Horizontal Pocket Type Dial Test Indicator with Bracket 0.8mm
Dial Indicator, Test, Measure & InspectMitutoyo 513-517-10T (0.01mm) Horizontal Pocket Type Dial Test Indicator with Bracket 0.8mm
Detailed Description
This is a small type of Dial Test Indicator (Lever Type) which offers you the following benefits:
- Reversible measuring direction (clutch type)
- Jeweled bearings assure higher sensitivity and accuracy
- Carbide stylus tip ø2 mm
Accessories Included
- 8mm & 4mm Stem
- Swivel clamp for 4mm & 8mm dovetail stem
- Stylus 1mm diameter carbide point
- Stylus 3mm diameter carbide point
- 100mm Holding Bar
- 8mm diameter holding rod
- Spanner
SKU: n/a
There are no reviews yet.